Anti Slip Tape For Bathtub
 | Anti Slip Tape For Bathtub
Contact Us |
Product Description
Caution Roll Company is a manufacturer of anti slip tape for bathtub applications for tub bottoms and wet bath surfaces where bare feet need reliable grip without a harsh grit texture. This transparent, non-abrasive tape uses a 0.45-0.75 mm embossed PEVA/PVC film with water-resistant acrylic adhesive for smooth acrylic, fiberglass, and ceramic bathtub bottoms. It is available as rolls, pre-cut strips, and rounded-corner pieces for neat installation, low visual impact, and repeatable bathtub safety layouts.
Product Photos
Benefits
- Non-abrasive bathtub safety tapegives wet-foot grip without the scratchy feel of mineral grit tape.
- Clear low-haze appearance helps the strip blend into white, acrylic, fiberglass, and ceramic tub bottoms.
- Water-resistant acrylic adhesive supports wet bath surface use after a 12-24h dry bonding period.
- Rolls can be cut to fit different bathtub lengths, heel zones, forefoot areas, and curved bottom sections.
- Pre-cut rounded strips help reduce installation time and lower the chance of corner lifting during cleaning.
- A 5-8 strip layout with 25-40 mm spacing leaves open channels for drainage, rinsing, and soap residue removal.
- Typical 180-degree peel adhesion reaches 6-10 N/25 mm on clean acrylic or ceramic surfaces.
- A 24-72h trial check helps confirm edge lifting, adhesive transfer, surface dulling, and removable residue behavior.
Technical Data Sheet
Item | Typical Value |
Product type | Transparent anti slip tape for bathtub bottom use |
Surface material | Embossed PEVA/PVC/vinyl non-abrasive film |
Total thickness | 0.45-0.75 mm |
Surface texture | Soft embossed wet-grip pattern, barefoot comfortable |
Adhesive type | Water-resistant acrylic pressure-sensitive adhesive |
Adhesive thickness | 60-100 um |
Release liner | White glassine or PE-coated paper liner |
Standard roll width | 25 mm, 38 mm, 50 mm, custom slitting available |
Standard roll length | 5 m, 10 m, 18 m, 20 m |
Pre-cut strip size | 20 mm x 200 mm, 25 mm x 300 mm, 50 mm x 450 mm |
Corner style | Rounded-corner cutting recommended for tub bottoms |
Suggested strip spacing | 25-40 mm for drainage and cleaning access |
180-degree peel adhesion | 6-10 N/25 mm on clean acrylic or ceramic surface |
Dry bonding time | 12-24h before heavy wet exposure |
Water soak observation | 24-72h edge lifting check after wet dwell |
Residue check | Test removal after sample dwell before wider installation |
Recommended surface | Smooth acrylic, fiberglass, ceramic, enamel-coated tub bottom |
Application temperature | 10 C-35 C |
Service temperature | -10 C to 60 C |
Cleaning compatibility | Mild bathroom cleaner observation recommended |
Visual appearance | Clear low-haze finish on white or light tub surfaces |
Product Overview
This tape is designed for the standing area inside the bathtub, not for stair treads, industrial floors, caulking joints, or bath mats. The soft embossed surface improves wet-foot traction while remaining comfortable for bare feet, including children, elderly users, hotel guests, and care-facility residents. On white, cream, or light-colored tubs, transparent bathtub grip strips keep the bathtub looking clean instead of giving it a heavy industrial tape appearance.
Good bonding starts with surface preparation. The tub bottom should be smooth, dry, and free from soap film, body oil, old adhesive, wax, silicone cleaner, or limescale. Acrylic and fiberglass tub bottoms often hold invisible bath oil and cleaner residue, so they need extra wiping before installation. Ceramic or enamel-coated tubs usually offer a harder bonding surface, but scale near the drain line still needs to be removed. After placement, pressure should be applied from the center outward so trapped air is pushed out and the 60-100 um adhesive layer can contact curved or slightly uneven tub areas more evenly.
Application
- Bathtub bottom standing zones in hotels and serviced apartments
- Acrylic tubs needing clear strips with a low visual impact
- Fiberglass bathtubs after soap film and bath oil removal
- Ceramic or enamel-coated tubs with smooth dry bonding areas
- Senior-care and healthcare bathing rooms requiring comfortable barefoot traction
- Rental property maintenance kits using pre-cut rounded strips
- Home improvement packs using rolls for on-site cut-to-length installation
- OEM bathtub safety strip sets with repeated 25-40 mm spacing layouts
How should the tub surface be prepared before applying transparent non-abrasive tape?
Surface preparation affects bonding more than tape thickness alone. Acrylic and fiberglass tubs may hold bath oil, soap film, cleaner residue, or invisible silicone contamination, so the surface should be washed, rinsed, fully dried, and wiped again before the strip is positioned. Ceramic and enamel-coated tub bottoms should also be checked around the water line and drain, where scale often remains. After placing the wet bath surface adhesive tape, press the strip firmly from the middle outward, then press each edge again. For hotel, apartment, or care-facility installation, one strip should be tested for 24-72h to check water resistance, edge stability, cleaning compatibility, and removable residue behavior before wider placement.
FAQ
Can this tape be used on acrylic bathtubs?
Yes. It can be used on smooth acrylic tubs after soap film, body oil, and cleaner residue are removed.
Is the surface rough like sandpaper?
No. It uses a non-abrasive embossed surface for wet-foot grip and barefoot comfort.
How long should the tape cure before water exposure?
A 12-24h dry bonding period is recommended before heavy wet use.
Can it be supplied as rolls and pre-cut strips?
Yes. It can be supplied as rolls, pre-cut strips, and rounded-corner pieces for different bathtub bottom layouts.